ERROR CODEd80Diagnostic reference

LG · Dryers

LG Dryer d80 Error: Check the Exhaust Path

THE SHORT ANSWER

The dryer reports restricted exhaust airflow.

d80 is an exhaust-airflow warning on covered LG vented dryers. Start with the lint filter and accessible duct. A clean filter does not rule out a restriction farther along the vent.

First safe check

Stop the dryer and check the lint filter.

Applies to

LG vented dryers with Flow Sense; not a universal heat-pump dryer code.

Before you start

Do not keep operating a dryer with restricted exhaust. Avoid moving a gas dryer or disturbing its supply connection.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • d80 appears
  • Drying may take longer

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Lint accumulationLint on the filter or accessible ventClean accessible lint.
Crushed connectorVisible hose compressionHave routing corrected safely.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 2 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Remove lint; reinstall the clean, dry filter.

    What to note

    The filter must be present before operation.

  2. Check for a visibly crushed or kinked connector without dragging the appliance.

    What to note

    Hidden or inaccessible restrictions need professional cleaning.

THE DETAILS MATTER

Scope & troubleshooting notes

Gas-dryer exception

LG notes that d80 can also involve missing gas supply on a gas dryer. Have the installer or qualified technician assess that condition; do not open gas components.

YOUR NEXT DECISION

When to stop and get help

Arrange vent cleaning or service if accessible checks do not resolve the warning.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

LG support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. LG dryer error code list

    LG USA · Manufacturer support · Checked

    d80/d90/d95; lint filter; exhaust path — LG vented dryers; not a heat-pump dryer procedure

  2. LG dryer not heating, not drying or taking a long time

    LG USA · Manufacturer support · Checked

    Airflow restriction; visible connector; exterior outlet; professional inspection — LG vented dryers; installation-test controls are model-specific

ErrHive is an independent information resource, not an authorized representative of LG. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.