ERROR CODEHCDiagnostic reference

Samsung · Dryers

Samsung Dryer HC or hE Error: Heat and Airflow Checks

THE SHORT ANSWER

The dryer reports an abnormal heating condition.

HC usually means the dryer is getting too hot. Samsung identifies trapped heat from a restricted lint screen or exhaust as a common explanation; some electric-dryer cases involve insufficient heat from low supply voltage.

First safe check

Stop the dryer and inspect the lint filter once safe to handle.

Applies to

Samsung US dryers; heating-code variants depend on model.

Before you start

Do not keep restarting an overheating dryer. Leave electrical measurements, cord wiring and gas work to qualified professionals.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • HC or hE appears
  • Drying may stop or perform poorly

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
Restricted airflowLint or obstructed exhaustClean the accessible filter; arrange vent inspection.
Supply issue on an electric dryerService may be neededFault persists after airflow checksAn electrician must verify supply.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Remove accumulated lint and reinstall an intact filter.

    What to note

    Never operate with the filter removed or damaged.

  2. A clean filter does not establish that the exhaust duct is clear. Professional vent cleaning may be needed.

    What to note

    Keep inaccessible work for a qualified person.

  3. Record the code and whether it occurred during a cycle or a vent test.

    What to note

    Persistent HC needs diagnosis.

THE DETAILS MATTER

Scope & troubleshooting notes

Heating and temperature codes differ

Record the exact display. Do not replace the thermistor, heater, or control board on the basis of HC alone.

YOUR NEXT DECISION

When to stop and get help

Get service if the warning remains after the exhaust system is confirmed clear.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Samsung support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. Samsung dryer error codes

    Samsung US · Manufacturer support · Checked

    Heating errors; temperature errors; voltage errors — Samsung US dryers; codes vary by model

  2. How to clean a Samsung dryer

    Samsung US · Manufacturer support · Checked

    Lint filter precautions; professional vent cleaning — Samsung US dryers

  3. Clothes are not dry after a Samsung dryer

    Samsung US · Manufacturer support · Checked

    Vent test results; HC; 9C1 — Samsung vented dryers with the relevant test

ErrHive is an independent information resource, not an authorized representative of Samsung. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.