Maytag · Washing machines
Maytag Washer HC: Check Reversed Hot and Cold Hoses
THE SHORT ANSWER
Hot and cold inlet hoses are reversed.
HC reports reversed hot and cold inlet connections. Maytag says this message can appear at the end of the wash.
Trace the accessible hoses from the household valves to the labeled washer inlets.
Turn off both water supplies before disconnecting any hose. Use an installer if access is difficult.
WHAT YOU MAY NOTICE
Symptoms to record
- HC appears at the end of a cycle.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Reversed inlet hoses | Cold supply goes to the hot inlet, or the reverse. | Compare valve-to-inlet routing with the manual. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
Read the inlet labels and check which household valve feeds each hose.
What to noteThe connection mismatch is identified.
Maytag directs owners to shut off water and reverse incorrectly connected hoses. Follow the installation instructions.
What to noteHot and cold supplies reach the proper inlets.
Run another cycle after a correct, leak-free installation.
What to noteCheck whether HC returns.
THE DETAILS MATTER
Scope & troubleshooting notes
Installation context
Note whether HC started after installation or hose work when contacting support.
YOUR NEXT DECISION
When to stop and get help
Get installation help if the connections cannot be verified or the code returns after correction.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- HC - Error Code
Maytag · Manufacturer support · Checked
Reversed hot and cold inlet hoses — Applicable Maytag top-load washers
- Error Codes in Top Load HE Washers
Maytag · Manufacturer support · Checked
LdL, LdU, HC and OFb entries — Selected Maytag top-load HE washers