Whirlpool · Washing machines
Whirlpool Washer F0 E1 or rL: Empty the Clean Washer Cycle
THE SHORT ANSWER
A load was detected during the Clean Washer cycle.
F0 E1 or rL means Clean Washer was started while the machine detected items inside.
Check whether laundry was left in the drum.
Wait for normal access; do not force a locked door.
WHAT YOU MAY NOTICE
Symptoms to record
- Clean Washer does not proceed normally.
UNDERSTAND THE POSSIBILITIES
Causes & useful observations
A code identifies a condition. It does not, by itself, confirm which part needs repair.
| Possible cause | What to look for | Safe check / next step |
|---|---|---|
| Items in the drum | Laundry remains during maintenance. | Empty the washer completely. |
WORK THROUGH THE BASICS
Safe troubleshooting checks
Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.
This guidance concerns Clean Washer, not an ordinary laundry cycle.
What to noteYou are interpreting the right situation.
Take all items out of the drum once the door opens normally.
What to noteThe drum is empty.
Restart Clean Washer using the instructions for your model.
What to noteThe cycle can proceed without a load.
THE DETAILS MATTER
Scope & troubleshooting notes
Keep the context with the code
Record the selected cycle when requesting help. Do not transfer this meaning to another appliance or a differently documented model.
YOUR NEXT DECISION
When to stop and get help
If the empty machine still reports a load, contact Whirlpool for service.
THE EVIDENCE
Sources & verification
Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.
- F0 E1 or rL - Front Load Washer
Whirlpool · Manufacturer support · Checked
Clean Washer cycle detects a load — Selected Whirlpool front-load washers
- Error Codes in Front Load Washers
Whirlpool · Manufacturer support · Checked
Code overview — Whirlpool front-load washers; individual model applicability varies