ERROR CODEL2Diagnostic reference

Whirlpool · Dryers

Whirlpool Electric Dryer L2: Supply Voltage and No Heat

THE SHORT ANSWER

Low or missing line voltage may prevent electric heating.

L2 indicates low or missing line voltage. The drum can still turn while the heating circuit lacks power.

First safe check

Check the dryer circuit breaker position without opening electrical equipment.

Applies to

Applicable Whirlpool electric dryers; not a general gas-dryer code.

Before you start

Do not test live voltage, open terminal connections, or repeatedly reset a tripping breaker.

Go to safe checks

WHAT YOU MAY NOTICE

Symptoms to record

  • Drum may turn without heat.
  • L2 appears on the control.

UNDERSTAND THE POSSIBILITIES

Causes & useful observations

A code identifies a condition. It does not, by itself, confirm which part needs repair.

Possible causes, observable symptoms, safe checks, and service boundaries
Possible causeWhat to look forSafe check / next step
One side of the supply interruptedMotor runs but heat is absent.Check the household dryer breakers.
Supply or cord installation problemService may be neededL2 remains after a normal power cycle.Have an electrician inspect the installation.

WORK THROUGH THE BASICS

Safe troubleshooting checks

0 of 3 checked

Use the checkboxes to keep track as you read. Stop at any warning or step that does not match your appliance.

  1. Whirlpool describes two supply sides for its electric dryer. Check for a tripped breaker.

    What to note

    Identify a possible supply interruption.

  2. If safe, turn dryer breakers off for one minute, then on.

    What to note

    Power is restored.

    Stop here if: Stop if the breaker trips.
  3. Check whether L2 returns.

    What to note

    Persistent L2 requires professional supply checks.

THE DETAILS MATTER

Scope & troubleshooting notes

No terminal work here

The manufacturer also discusses cord installation; this guide reserves that work for a qualified professional.

YOUR NEXT DECISION

When to stop and get help

Have a qualified electrician investigate a persistent supply problem.

Record what you see

Keep the full model number, exact displayed code, and your observations together for the next conversation.

Use the right support

Contact the manufacturer or a qualified appliance technician when the guide calls for service.

Whirlpool support

THE EVIDENCE

Sources & verification

Our explanations are editorial summaries of the documentation below. They do not replace the instructions for your exact appliance.

  1. L2 - Error Code - Dryer

    Whirlpool · Manufacturer support · Checked

    Home supply; two circuits; one-minute power cycle; electrician — Applicable Whirlpool electric dryers

  2. Error Codes in Dryers

    Whirlpool · Manufacturer support · Checked

    AF, L2 and PF entries — Whirlpool dryers using the listed displays

ErrHive is an independent information resource, not an authorized representative of Whirlpool. Follow your appliance’s manual. Hazardous repairs belong with qualified professionals. Read our safety policy.